How-To: Perform Linksys RE6300 Setup in Minutes

Linksys RE6300 AC750 WiFi extender is quite easy to setup. All you need to learn is how to connect the Linksys RE6300 extender to the router, where to visit online to configure Linksys AC750 extender, and after set up where to place it. Don’t worry! You do not have to roam on different websites to find the answer to these questions. Here you will find everything that is important for Linksys RE6300 setup.
So, keep scrolling down!

Requirements for Linksys RE6300 Setup

Before we initial Linksys extender setup process, let’s prepare all the things that are important for the setup. So, consider the following things:

• An active internet connection
• Proper electric power sockets
• Two ethernet cables
• Minimum two web browsers (updated)
• WiFi router
• Desktop or laptop

Once you are ready with the afore-mentioned things. Let’s know about the two different Linksys AC750 extender setup methods.

Linksys WiFi Extender Setup Methods

• Ethernet or manual method – This method requires two ethernet cables to perform WiFi AC750 extender setup. 
• WPS or automatic method – WPS, aka, wireless protected setup method is quite easy. All you have to do is press the WPS button to sync the extender to the router. 

Without keeping you waiting long, let’s understand each method from closer.

Linksys Extender Setup: Manual Method

• Take an ethernet cable and try to connect your Linksys RE6300 to your existing home WiFi router. /li>
• Use another ethernet cable to connect your desktop or laptop to the router.
• Now, plug in your Linksys AC750 RE6300 extender and router to the electric power outlet.
• Turn on your desktop or laptop.
• Once the power LED turns solid green, run any web browser, and then visit extender.linksys.com web address.
• You are prompted to the Linksys extender login web page.
• Enter the WiFi extender login credentials.
• Hit on the ‘Login’ button.
• Select the ‘Extender’ mode, and then follow the on-screen instructions carefully.
• Once you are done with the customization, hit on the ‘Save’ button to apply the changes.
• Unplug the WiFi extender and place it in a new location. Ensure that you have placed your WiFi extender in halfway between your home WiFi router signal and a dead or weak network zone.
• Now, try to connect your computer to the extended network and visit any website to test the signal strength and performance.

Linksys RE6300 Setup via WPS Method

The WPS, aka, wireless protected setup method is quite easy and quick as compared to Linksys extender ethernet setup method. You can apply these steps for any standard WiFi extender setup. Follow the below-mentioned steps to sync your WiFi extender to the router:

• Plugin your Linksys extender to an electric power outlet near to your home WiFi router.
• Wait for a few minutes, and then press the WPS button present on your WiFi range extender.
• Let the WPS LED turn solid green.
• Unplug your WiFi range extender and place it to a new location.
• Turn on your desktop or laptop and try to connect it to the extended wireless network.
• Run CMD on your desktop and ping 192.168.1.1 to check the network connectivity.

So, these are the two quick and easy ways to set up the Linksys RE6300 extender. For the latest updates related to Linksys WiFi extender follow us.

What to do if Linksys RE6300 Extender Doesn’t Work?

If your Linksys WiFi extender no longer visible on your home WiFi network manager, then there is something serious. There can be many reasons why your Linksys RE6300 extender is not working. The most common reason why Linksys RE6300 extender does work is impartial setup.
In this tutorial, we are going to discuss some amazing troubleshooting tips that will surely help you to make your WiFi range extender into running mode. So, let’s roll the balls!

1. Reboot your RE6300 Device

Rebooting is one of the most simple and effective solutions to fix most of the major issues. Unplug your Linksys RE6300 from the wall socket, wait for a few minutes, and plug it back into the wall again. Ensure that the power plug is not damaged and your extender is receiving the proper power supply.

2. Check Linksys RE6300 Extender Setup

As we have mentioned earlier in the post, and improper or impartial Linksys RE6300 setup can stop your device to run. So, walk through the below-mentioned steps to set up your WiFi extender accurately.

1. Unplug your WiFi range extender from the electric power socket.
2. Disconnect all the attached connected cables between your router and computer.
3. Wait for a few minutes, and then plug back your WiFi range extender into an electric power outlet.
4. Connect all the disconnected cables and wires.
5. Run any desktop and visit extender.linskys.com web address.
6. Enter the default Linksys extender login credentials.
7. Follow the on-screen instructions and once done, click on the ‘Apply’ button to save the changes.
8. Connect your laptop or smart device to the Linksys extender setup-XXX network.
9. Run any web browser and access any of your favorite websites to test the internet connectivity.

Kudos! Your WiFi extender has been setup successfully. Now, enjoy the seamless internet signals throughout your home.

3. Reposition your WiFi Extender

If your WiFi range extender is not providing accurate results, then try to reposition it. The incorrect position can be one of the reasons that might restrict you to access Linksys RE6300 extender login web page. Confused? We tell you how it happens.
If you have placed your WiFi extender under the stairs or behind the cupboard or inside the wardrobe, then your WiFi extender signal distorts. As they have to pass through hard objects. If your extender device is placed near any radio interference devices, radios, televisions, or Bluetooth speakers, then your signal strength might reduce. So, keep your device away from it.

4. Cross-Check the WiFi Extender Settings and Bandwidth

Visit your Linksys extender admin panel and check the WiFi security settings and bandwidth. If you are using any older WiFi devices that support only 2.4GHz bandwidth and your WiFi extender is working on 5GHz, then you might face trouble connecting your device. So, you need to change your WiFi extender bandwidth. The majority of the devices support WPA password security. So, be sure that you have applied WPA password security.

5. Reset RE6300

If none of the above worked for you, then consider resetting your Linksys RE6300 extender. Once the reset is done successfully, your extender will restore back to default factory restore settings. To reset Linksys extender, follow the below-mentioned steps: 

• • Plug in your Linksys extender. 
  • Find the reset button and press it with the help of a paper pin clip. 

• Press the button and wait for a few minutes until the power LED starts blinking. 
• Then, connect your extender to the router. 
• Turn on your desktop and run any web browser. 
• Now, visit Linksys RE6300 setup web page. 
• Enter default Linksys extender login credentials. 
• Follow the on-screen instructions and to reconfigure your WiFi range extender. 
• Once done hit on the apply button to save the changes. 

That’s all! Let us know which method actually helps you to fix Linksys extender not working issue via comments.