14 Simple Tips on How to Unclog a Clogged Drain
When you think about the plumbing system of your home, the last thing that comes to mind might be a clogged drain. After all, most people don’t think about it until there is an emergency or some kind of clog that is causing water damage. But with a clogged drain, it is not too late to prevent expensive plumbing repairs or a flooded basement. With the right information, you can fix the problem without needing a plumber or hiring a contractor. Here are nine simple steps to unclog a clogged drain that will prevent damage to your home and reduce costs.
1. Unplug the Drain Line
The first step to unclog a clogged drain is to unplug the drain line from the wall. If you have a garbage disposal, make sure that it is not plugged up. Conversely, if you have a sink or bathtub, unplug the drain line from the faucet. Also, check the filter in the sink. If you see any debris, remove it. However, if you are unsure how to unplug a drain line, call a plumber or a local handyman for help.
2. Remove the Clog
Once you have unplugged the drain line, the next step is to remove the clogged drain. To do this, you need to know what type of clog you have. There are two types of clogs: a soft clog and a hard clog. A soft clog is usually caused by hair or soap scum. To remove a soft clog, use a plunger. If you don’t have a plunger, you can use a plastic spoon or even a paper towel.
3. Clean Out the Drain Line
After removing the clog, you need to clean out the drain line. To do this, you can use a plunger, a vacuum cleaner, or a snake. For a plunger, you need to insert it into the drain line and then push it back and forth to dislodge the clog. You can also use a vacuum cleaner to suck out the clog. To use a vacuum cleaner, attach the hose to the drain line and then plug the end of the hose into the vacuum cleaner. Then, turn on the vacuum cleaner and pull the hose back and forth to remove the clog. Lastly, you can use a snake to remove the clog. To use a snake, you need to put it into the drain line and then pull it back and forth to dislodge the clog.
4. Replace the Drain Pipe
You will want to replace the old drain pipe with a new one. You can do this by cutting the pipe off at the connection and then attaching a new pipe. Before cutting off the old pipe, make sure that there is no debris stuck in the pipe. Also, make sure that the pipe is dry before starting. You can use a hacksaw to cut the pipe off, but you may have to take the drain cover off of the sink if you are going to use a hacksaw. A good way to cut the pipe is to use a pipe cutter.
5. Check for Dampness
If you have found any leaks or signs of dampness inside your home or business, you need to call a professional service to check for problems such as mold growth. Once you notice any signs of dampness, you should call a professional service as soon as possible. These experts will take a look at the problem and fix it so that you do not have to worry about a leak for the rest of your life. You can also look for leaks by simply checking the basement, attic, crawlspace, and other areas where leaks could occur.
6. Check the Filter
Once you have removed the clog from the clogged drain, you need to check the filter. The filter is a screen that is located inside the sink or tub. It catches hair, soap scum, and other debris that can get into the drain line. If the filter is clogged, you need to replace it. Certainly, if you do not have a filter, you need to install one.
7. Flush the Drain
Once you have removed the clog and checked the filter, you need to flush the drain. To do this, you need to run hot water through the drain line. To do this, turn on the faucet and let the water run through the drain line for at least five minutes. If you are unsure how to flush a drain, call a plumber or a local handyman for help. In another case, you can use a plunger to dislodge the clog.
8. Reinstall the Drain Line
Once you have flushed the drain, you need to reattach the drain line to the wall. This is where you need to be careful. You need to make sure that you reconnect the drain line to the wall in the same spot. If you reconnect the drain line to the wall in a different location, you may cause water damage. Soon after, you can turn off the water.
9. Clean Up the Area
After you have flushed the drain and reinstall the drain line, you need to clean up the area. In particular, you need to clean the sink or tub. You can use a sponge to clean the sink or tub. If you want to remove the soap scum, you can use a solution of vinegar and baking soda. However, you need to be careful when you are using this mixture. If you spill some on the floor, you can clean it up with a solution of white vinegar and water.
10. Check for More Clogs
If you have a clogged drain again, you need to repeat the process. Hopefully, this will prevent a bigger problem. You need to be careful when you are working around drains, sinks, and tubs. Make sure you wear the right protective gear. You need to know how to prevent clogs before you experience one.
11. Fix Any Damaged Pipe
You can easily repair damaged pipes without having to call a professional service. There are many types of materials that you can use to repair pipes. You should make sure that you use the right material for your type of pipe. To get started with repairing damaged pipes, you can simply follow these simple steps.
First, you should buy a PVC pipe cutter. This tool can help you to repair damaged pipes. Next, you should open up the hole in the pipe and cut out any part of the pipe that is damaged. Then, you can add some tape on the outside of the pipe. After that, you can remove the tape once it dries up.
12. Proper Plumbing Maintenance
It is important to maintain your home’s plumbing system properly. This means keeping an eye on all your pipes and hoses to make sure that they are not leaking. This is the only way to know when there are problems with them. A number of different systems are known for monitoring the condition of a road surface.
13. Run a Hot Water Pipe for 10 Minutes
If you still have problems with your bathroom sink or any drain, you should run a hot water pipe for ten minutes. Make sure that you run the hot water pipe at least for ten minutes. This will be an effective way to get rid of the drain clog. After running the hot water pipe, you should wait for the water to get cold. You can then switch off the hot water pipe. You should then check if you are able to unclog the sink or not. If you still cannot unclog the sink, you need to call a plumber.
14. Call a Plumber
Finally, if you are still having problems with a clogged drain, you need to call a professional plumber. They will be able to unclog your drain quickly and efficiently. And if you are living somewhere in Toronto and seeking for a experienced plumber in your nearby areas then Google it for the “best Toronto plumber near me”. Consequently, you will find the best plumber in your area.
Conclusion
To avoid any further plumbing problems, you need to follow the above steps to fix a clogged drain. Hopefully, this article will help you to fix a clogged drain quickly and efficiently. And if you are not sure how to unclog a drain, you need to call a professional plumber.
